3-in-1 PEM FUEL CELL/REDOX FLOW CELL HARDWARE

Product Code: CX-3-in-1

Introduction:

3-in-1 PEM FUEL CELL/REDOX FLOW CELL HARDWARE is an electrochemical device that converts chemical fuel into energy.  It can be used both for proton exchange membrane fuel cell or redox flow cell.  Titanium plates (99..99% Ti) serves both as end plate, channel plate  and current collector. Through this 3-in-1 design, this hardware is easy to assemble and side reaction has been greatly decreased.

Features:

Easy to assemble

Optimized flow field pattern

No leakage

Compatible with variable electrode thickness

PEEK fittings for gas tight connection to 3mm tubing 

Technical specification:

Gaskets: FEP/fluorubber gasket

Size At (H x W x L): 6cm x 6cm x 4.5cm  

Weight (pounds): 3 

Fuel Compatibility:  O2, H2, air, methanol, ethanol, liquid acid/base electrolyte 

Normal Operating Temp: room temperature ( can customize to max. 180 °C)

Suggested anode/cathode dimension: 2.2*2.2cm

Gasket thickness: based on anode/cathode thickness range will provide ~50pcs, for example, anode/cathode thickness 0.1-0.3mm, FEP gasket: 0.1/0.15/0.25mm, each 4pcs, fluorubber gasket:   0.2/0.3mm ,each 20pcs