COMPLETE REDOX FLOW BATTERY TEST CELL SETUP
Product Code: CX-5-SET
Introduction:
This package is intended for redox flow battery research and development and includes everything you need to get started. The redox flow cell is our 3-in-1 PEM FUEL CELL/REDOX FLOW CELL HARDWARE (SKU: CX-3-in-1). The whole setup including 1set redox flow battery test cell, 1 set LabM6 Dual-channel peristaltic pump, 1 set BTS4000-5V12A 8-channel battery tester, 2sets Reservoir flasks with specialized lids and necessary tubing, testing-wire. 2pcs carbon felt and 1pc Nafion N117 membrane are also included for you to easy start your experiment.
Setup components:
1. Redox Flow Battery Test Cell
- Active Area: 2*2cm2
- Machined Titanium (99.9% purity) half cell
- Fittings for tight connecting to 3 mm tubing
- Gaskets: Flurorubber, 0.5 or 1 mm thickness
2. LabM6 Dual-channel peristaltic pump
- Rotation Speed: 0.5-600rpm
- Tube: 3#, 14#, 19#, 16#, 25#, 17#, 18# / 15#, 24#
- Channels: 2
- Flow rate (ml/min): 0.85-1740 per channel
3. BTS4000-5V12A 8-channel battery tester
- CV output range 25mV~5V
- Min discharge voltage 2.0V for universial holder, 2.5V for 2m cable
- Accuracy ± 0.05% of FS
- Stability ± 0.05% of FS
-
Output range/channel
- Range1: 5mA-1A
- Range2: 1A-6A
- Range3: 6A-12A
-
CV cut-off current
- Range1: 2mA
- Range2: 12mA
- Range3: 24mA
4. Reservoir flasks with specialized lids
2 filling pipeline, borosilicate flask, PBT lid, 316L stainless stee fitting
5. Other accessories
-
Consumables:
- Carbon felt*2pcs
- Nafion N117 membrane:1pc
- Tubing, testing-wire with clips and connectors
