CNB-1-S27
NKK-TF4030 Cellulose separator (Low ESR Type), Suitable for supercapacitor
Product Name & Description
NKK-TF4030 Cellulose separator
30µm Cellulose Membrane (Hydrophilic)
Primary Applications
Cellulose separator for large cells, low Equivalent series resistance (ESR) type.
Product Benefits
- High reliability type, Lower ES
- High electrolyte holding ratio type
Technical Data (Typical Properties)
|
Basic Film Properties |
Unit of Measure |
Typical Value |
|
Thickness |
μm |
30 |
|
Density |
g/cm3 |
0.40 |
|
Porosity (calculated) |
% |
73 |
|
Moisture |
% |
5 |
|
Tensile Strength |
N/15mm |
10.3 |
|
Air Resistance |
sec/100cc |
109.6 |
|
Water Absorption |
mm/10min |
35 |
|
pH |
- |
6.2 |
Remark
Because TF is made from cellulose, it tends to absorb moisture, and depending on circumstances, it might contain 7-10% moisture. When assembling cell with TF, sufficient drying is required. Recommended drying condition is in the range of 100-160°C within 24 hours by vacuum drying. After drying procedure, please handle the products under the low dew point environment. Recommended dew point is less than -60°C. In the drying procedure, the products may shrink about 1% lengthwise and widthwise, so please design your product after taking this shrinkage into consideration.
Download Material Safety Data Sheet:
Download Technical Data Sheet:
