LFP Cathode Sheet (LF0607) Single-sided, 5 pieces/pack
LFP Cathode Sheet (LF0607) Single-sided, 5 pieces/pack
LFP Cathode Sheet (LF0607) Single-sided, 5 pieces/pack
LFP Cathode Sheet (LF0607) Single-sided, 5 pieces/pack

CNB-2-CS13

LFP Cathode Sheet (LF0607) Single-sided, 5 pieces/pack

$104.00
/
Size

Product Name & Description

LFP Cathode Sheet (LFP0607) is based on Carbon Coated Aluminum Foil (both sides) coated by Lithium iron phosphate (LF0607) on a single side and can be used as the cathode of Li-Ion battery.

Product Remark

Front Side: Active Material Coating
The front surface is seen as a deep black color, which is uniform and dense across the sheet.
The adhesion of the LFP coating is strong, ensuring the material remains securely bonded to the aluminum substrate and does not peel off easily.
Back Side: Aluminum Substrate
The back surface appears grey and has a lighter coloration compared to the front.
The coating on this side is slightly uneven, with some sections exhibiting reflective properties.
The coating layer on the back can be easily peeled off and removable with water.

Initial Charge and Discharge Test Conditions:

  • Temperature: 25°C
  • Charge: First, charge at a constant current of 0.1C to 4.2V, then charge at a constant voltage until the current drops below 0.02C.
  • Discharge: Discharge at a constant current of 0.1C to 2.5V.

Rate Performance Test Conditions:

  • Temperature: 25°C

  • Charge: First, charge at a constant current of 0.5C to 4.2V, then charge at a constant voltage until the current drops below 0.02C.
  • Discharge: Discharge at constant current rates of 0.1C, 0.2C, 0.5C, 1C, 2C, and 3C to 2.5V.

Cycle Test Conditions:

  • Temperature: 25°C
  • Charge: First, charge at a constant current of 0.5C to 4.2V, then charge at a constant voltage until the current drops below 0.02C.
  • Discharge: Discharge at a constant current of 1C to 2.5V.

Specification

Material

Lithium iron phosphate

Sheet Size (cm)

10*10

Current Collector Thickness (μm)

14

Current Collector Areal Density (mg/cm2)

3.45

Coating Areal Density (mg/cm2)

12.3

Active Material Specific Capacity (mAh:g)

150mAh/g

Active Material Ratio (%)

91.5

Shelf Life

1 year (vacuum sealed storage),
use within 1 month after opening

Instructions For Use

1.Electrode calendering, requires calendered the electrode according to the recommended compaction density
2.The surface density needs to be determined based on the actual weighing results.
3. Before placing it in the glove box, the electrodes needs to be vacuum dried at 105 ℃ for 4 hours


Note: Since the electrodes are single-side-coated, calendering may cause curling issues. 

 

Download Material Safety Data Sheet:


Download Technical Data Sheet:

Why Choose Beyond Battery?

Packed with Care

Your selected purchases are inspected and packed with care and consideration, both for the receiver and the handler.

30-Days Satisfaction Promise.

We work tirelessly to improve our products and services. If you are not satisfied with our product, contact us within 30-days of your purchase and let us make it up to you!

A Global
Provider

Reach out to us from wherever you are.
⟵ Back to Foil and Foam